Creating an Ubuntu 18.04 Server Foreman

Install

Just do a basic install using ubuntu-18.04.3-live-server-amd64.iso

Prevent Floppy Errors

If your server does not have a floppy, Ubuntu will report errors. This can be prevented by preventing the loading of a floppy driver on the clients:

echo "blacklist floppy" | sudo tee /etc/modprobe.d/blacklist-floppy.conf
sudo rmmod floppy
sudo update-initramfs -u

Enable Netowrking

The first time I built my VM, networking didn't install correctly. If this happens, create a netplan in /etc/netplans (note that because it's YAML, indentation is important)

network:
  version: 2
  renderer: networkd
  ethernets:
    ens160:
      dhcp4: true

Apply the netplan

sudo netplan apply

Verify that it worked

ifconfig

Host Name Setup

Ensure the Hostname is Set Correctly

sudo hostnamectl set-hostname puppet.bpopp.net

Modify the /etc/hosts file:

127.0.0.1 localhost
192.168.1.42 puppet.bpopp.net

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Install Foreman

Install Puppet

sudo apt-get -y install ca-certificates
cd /tmp && wget https://apt.puppet.com/puppet6-release-bionic.deb
sudo dpkg -i /tmp/puppet6-release-bionic.deb

There appear to be issues with puppet 6 and newer versions of foreman. Puppet 5 may work better:

wget https://apt.puppetlabs.com/puppet5-release-xenial.deb
sudo dpkg -i puppet5-release-xenial.deb
sudo apt update

Enable Foreman

echo "deb http://deb.theforeman.org/ bionic 1.22" | sudo tee /etc/apt/sources.list.d/foreman.list
echo "deb http://deb.theforeman.org/ plugins 1.22" | sudo tee -a /etc/apt/sources.list.d/foreman.list
sudo apt-get -y install ca-certificates
wget -q https://deb.theforeman.org/pubkey.gpg -O- | sudo apt-key add -

Install

sudo apt-get update && sudo apt-get -y install foreman-installer

Run

sudo foreman-installer \
 --enable-foreman-proxy \
 --foreman-proxy-tftp=true \
 --foreman-proxy-tftp-servername=192.168.1.42 \
 --foreman-proxy-dhcp=true \
 --foreman-proxy-dhcp-gateway=192.168.1.1 \
 --foreman-proxy-dhcp-nameservers="192.168.1.1" \
 --foreman-proxy-dhcp-range="192.168.1.150 192.168.1.175" \

Add the Puppetmaster as Host

Seems to be helpful to restart the puppetmaster after installing. To add the puppetmaster as a host, run this from the master:

sudo /opt/puppetlabs/bin/puppet agent --test

Now add our first module:

sudo /opt/puppetlabs/bin/puppet module install puppetlabs/ntp

Import the module from foreman:

• Click Configure > Classes
• Select "Any Organization" and "Any Location" from the menus in the menubar at the top
• Click the "Import environments from puppet" button
• Check the box next the module and click the "Update" button

Configure Foreman

• Click Infrastructure > Subnets > Create Subnet
• Use the following settings:
  • Name: bpopp.net
  • Network address: 192.168.1.0
  • Network Prefix: 24
  • Network Mask: 255.255.255.0
  • Gateway Address: 192.168.1.1
  • Primary DNS: 192.168.1.1
  • Boot Mode : DHCP
• In the tabs:
  • Under Domain tab, select bpopp.net
  • Under Proxies tab, select the puppet.bpopp.net proxies for DHCP, TFTP, and HTTPBoot
  • From Locations and Organizations, select Default Location/Organization

Create a Host Group

Host groups are used to quickly provision/configure servers of a specific type. For example, you can define a host group for Apache webservers that have all the correct modules installed for that specific type of server.