Openhab2

Install Openhab

Just do it..

Allow Openhab to access Serial Devices by Adding 'openhab' to the Dialout Group

sudo vi /etc/group
dialout:x:20:openhab

Install Z Wave Bindings

PaperUI > Add Ons > Bindings > Z-wave Binding > install

Once the Binding is installed, add the Z-wave binding as a Thing and verify that the serial port is correct. If the serial port is missing or will not be accepted, make sure you added openhab to the dialup group in the previous step.

Add Items

Within PaperUI, Things should begin showing up in the Inbox.
Add each thing using the naming convention : Location_Type_Target (ie. LivingRoom_Dimmer_AccentLights)
Click each thing and add the appropriate items for each channel

Rules

Accent Lights

// turn accent lights on at dusk
rule "Accent Lights on @ Sunset"
when
    Channel 'astro:sun:local:nauticDusk#event' triggered START
then
    logInfo("accent.rules", "Turning Lights On @ Sunset")
    Group_AccentLighting.sendCommand(On)
end

rule "Accent Lights Off @ 10"
when   
    Time cron "0 0 22 ? * *"
then
    logInfo("accent.rules", "Turning Lights Off @ 10")
    Group_AccentLighting.sendCommand(OFF)
end

// turn accent lights on at dusk
rule "Accent Lights on @ Sunset"
when
    Channel 'astro:sun:local:morningNight#event' triggered START
then
    logInfo("accent.rules", "Turning Lights On @ Sunset")
    Group_AccentLighting.sendCommand(On)
end

// turn accent lights on at dusk
rule "Accent Lights on @ Sunset"
when
    Channel 'astro:sun:local:daylight#event' triggered START
then
    logInfo("accent.rules", "Turning Lights Off @ Sunrise")
    Group_AccentLighting.sendCommand(Off)
end