Voron 2.4 Canbus Build: Difference between revisions
| Line 24: | Line 24: | ||
See https://docs.vorondesign.com/build/software/octopus_klipper.html | See https://docs.vorondesign.com/build/software/octopus_klipper.html | ||
# | # cd ~/klipper | ||
# | # make menuconfig | ||
#** Enable extra low-level configuration options | #** Enable extra low-level configuration options | ||
#** Micro-controller Architecture (STMicroelectronics STM32) ---> | #** Micro-controller Architecture (STMicroelectronics STM32) ---> | ||
Revision as of 18:38, 1 January 2026
Hardware
- BigTreeTech Octopus Pro 1.1
- BigTreeTech BTT Pi v 1.2.1 (Klipper)
- BigTreeTech SB2209 CAN/USB for Voron Stealthburner
- Voron Tap R8 Probe Kit
OS Install
Download and install the base Klipper kernel
- See [1] for the BTT Pi 1 image
- Find the pi on the network and login to pi as root/root
Install Klipper, Moonraker and Mainsail
- Install KIAUH (cannot install as root)
- sudo apt-get update && sudo apt-get install git -y
- cd ~ && git clone https://github.com/dw-0/kiauh.git
- ./kiauh/kiauh.sh
- Follow prompts to install various components
Configure Klipper
See https://docs.vorondesign.com/build/software/octopus_klipper.html
- cd ~/klipper
- make menuconfig
- Enable extra low-level configuration options
- Micro-controller Architecture (STMicroelectronics STM32) --->
- Processor model (STM32F446) --->
- Bootloader offset (32KiB bootloader) --->
- Clock Reference (12 MHz crystal) --->
- make
- Install firmeware to Octopus from file created at out/klipper.bin (this can be done using DFU or card (recommended))
- Install printer.cfg from