BPopp Sanctuary

Voron 2.4 Canbus Build: Difference between revisions

Page Discussion
Line 1: Line 1:
= Hardware =
= Hardware =


* [https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro BigTreeTech Octopus Pro 1.1]
* [https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro BigTreeTech Octopus 1.1]
* [https://github.com/bigtreetech/BTT-Pi BigTreeTech BTT Pi v 1.2.1 (Klipper)]
* [https://github.com/bigtreetech/BTT-Pi BigTreeTech BTT Pi v 1.2.1 (Klipper)]
* [https://github.com/bigtreetech/EBB/tree/master/EBB_SB2209_USB BigTreeTech SB2209 CAN/USB for Voron Stealthburner]
* [https://github.com/bigtreetech/EBB/tree/master/EBB_SB2209_USB BigTreeTech SB2209 CAN/USB for Voron Stealthburner]

Revision as of 05:58, 4 January 2026

Hardware

OS Install

Download and install the base Klipper kernel

  1. See [1] for the BTT Pi 1 image
  2. Find the pi on the network and login to pi as root/root

Install Klipper, Moonraker and Mainsail

Install KIAUH (cannot install as root) 

sudo apt-get update && sudo apt-get install git -y
cd ~ && git clone https://github.com/dw-0/kiauh.git
./kiauh/kiauh.sh

Follow prompts to install various components

Configure Klipper

See https://docs.vorondesign.com/build/software/octopus_klipper.html 

cd ~/klipper
make menuconfig
# Enable extra low-level configuration options
#  Micro-controller Architecture (STMicroelectronics STM32)  --->
#  Processor model (STM32F446)  --->
#  Bootloader offset (32KiB bootloader)  --->
#  Clock Reference (12 MHz crystal)  --->
make
  1. Install firmeware to Octopus from file created at out/klipper.bin:
    • Over USB from PI via DFU
    • From memory card (recommended)
  2. Install printer.cfg from
Retrieved from "http://wiki.bpopp.net/index.php?title=Voron_2.4_Canbus_Build&oldid=2086"