Hardware
- BigTreeTech Octopus Pro 1.1
- BigTreeTech BTT Pi v 1.2.1 (Klipper)
- BigTreeTech SB2209 CAN/USB for Voron Stealthburner
- Voron Tap R8 Probe Kit
OS Install
Download and install the base Klipper kernel
- See [1] for the BTT Pi 1 image
- Find the pi on the network and login to pi as root/root
Install Klipper, Moonraker and Mainsail
- Install KIAUH (cannot install as root)
- sudo apt-get update && sudo apt-get install git -y
- cd ~ && git clone https://github.com/dw-0/kiauh.git
- ./kiauh/kiauh.sh
- Follow prompts to install various components
Configure Klipper
See https://docs.vorondesign.com/build/software/octopus_klipper.html
cd ~/klipper
make menuconfig
# Enable extra low-level configuration options
# Micro-controller Architecture (STMicroelectronics STM32) --->
# Processor model (STM32F446) --->
# Bootloader offset (32KiB bootloader) --->
# Clock Reference (12 MHz crystal) --->
make
- Install firmeware to Octopus from file created at out/klipper.bin:
- Over USB from PI via DFU
- From memory card (recommended)
- Install printer.cfg from